Roll-A-Motors Three Phase
The Teco Roll-a-motor is ruggedly designed for low and high torque capabilities.
Smooth running, frequent forward and reverse operations together with a controlled output of the amount of expansion are highly desirable features and will create a more accurate joint in the finished product.
| Model No. | Tube Capacity O.D. min. – Max. |
Loaded Speed RPM | Voltage | Power Input Watt | Power Output Watt | Shank | Weight | Supplied with Quick Change Chuck |
 TC-1 |
STEEL 1/4″-1/2″ 6.35-12.7 mmNON-FERROUS 1/4″-5/8″ 6.35 – 15.87 mm |
2 speed 900 1400 |
42 Volt 3 PH. 220 Volt 3 PH. 380 Volt 3 PH. 50-60 Hz. |
425 | 225 | B-12 | 7 Lbs 3.2 Kg |
1/4 ” or 3/8″ |
 TC-3 |
STEEL 1/4″-1/2″ 6.35 – 12.7mmNON-FERROUS 1/4″-5/8″ 6.35-15.87mm |
1500 | 42 Volt 3 PH. 220 Volt 3 PH. 380 Volt 3 PH. 50-60 Hz. |
280 | 150 | MT-2 M30X1.5 |
21 Lbs 9.5 Kg |
3/8″ and 1/2″ |
 TC-4 |
STEEL 3/4″-2″ 19.05-50.8 mmNON-FERROUS 3/4″-2 1/2″ 19.05-63.5mm |
4 SPEED 120 195 360 680 |
42 Volt 3 PH. 220 Volt 3 PH. 380 Volt 3 PH. 50-60 Hz. |
1250 | 800 | MT-3 MT35X1.5 |
29.5Lbs OR 13.5 KG. | 3/8″ or 1/2″ |
TC-4/1 |
STEEL 3/4″-2″ 19.05-50.8 mmNON-FERROUS 3/4″-2 1/2″ 19.05-63.5mm |
5 SPEED 120 195 360 680 1450 |
42 Volt 3 PH. 220 Volt 3 PH. 380 Volt 3 PH. 50-60 Hz. |
1250 | 800 | MT-3 MT35X1.5 |
29.5Lbs OR 13.5 KG. | 3/8″ or 1/2″ |
TC-5 |
STEEL 1″-3″ 25.4-76.2 mmNON-FERROUS 1 1/4″-4″ 31.75-101.6mm |
5 SPEED 20 40 55 165 400 |
42 Volt 3 PH. 220 Volt 3 PH. 380 Volt 3 PH. 50-60 Hz. |
1500 | 900 | MT-4 MT50X2 |
46.0 Lbs OR 20.9 KG. | 1/2″ Quick Change Chuck and 3/4″ Fixed Chuck |