Hydraulic Operated Gripper Type Tube Puller for Condenser Tubes
Very fast – easy to use – light tool (patented)
When re-tubing condenser and other similar types of unit containing non-ferrous tubes this specially developed Hydraulic Gripper Tube Puller removes tubes or tube stubs without damaging the tube sheet holes. This unit can pull up to 4 to 6 tubes per minute. The hydraulic ram has a single cycle stroke of 6 inch and a pulling power of 7 or 11 tons.
The hydraulic pump operates at a pressure of 700 Bar and has High-Flow quick couplings.
The hydraulic gripper tube puller consists of
- Gripper tube puller unit (Patented)
containing:
- Stop nut
- Replaceable Gripper shells
- Bushing
- Puller mandrel
- Hydraulic Ram either: 7 or 11 tons pulling power with collar.
- Hydraulic Pump (electric or pneumatic) see page 40.
- Hand or Foot-switch, pump will only run when switch is operated.
- Connection hose with High-Flow quick couplings.
| Tube Size | Model No. | Grippers set | Puller Mandrel | Stop-Nut | Bushing |
| 5.8″ O.D.-16-18 Gauge 16 mm 0.D. to 12.70-13.50 mm I.D. |
CTP -625-16-18 | GCTP -625-16-18 | MCTP -625-16-18 | SCTP-3/8″-24 | BCTP-7/16″-20 |
| 5/8″ O.D.-19-22 Gauge 16 mm 0.D. to 13.90-14.60 mm I.D. |
CTP -625-19-22 | GCTP -625-19-22 | MCTP -625-19-22 | SCTP-3/8″-24 | BCTP-7/16″-20 |
| 3/4″ 0.D. 16-18 Gauge 19.05mm O.D. to 15.75-16.60 mm l.D. |
CTP -750-16-18 | GCTP -750-16-18 | MCTP -750-16-18 | SCTP-7/16″-20 | BCTP-7/16″-20 |
| 3/4″ 0.D-19-22 Gauge 19.05 mm 0.D. to 16.90-17.65 mm I.D. |
CTP-750-19-22 | GCTP-750-19-22 | MCTP-750-19-22 | SCTP-7/16″-20 | BCTP-1/2″-20 |
| 7/8″ 0.D.-16-18 Gauge 22.20mm O.D. to 18.90-19.70 mm I.D. |
CTP -875-16-18 | GCTP -875-16-18 | MCTP -875-16-18 | SCTP-1/2~-20 | 8CTP-1/2″-20 |
| 7/8″ 0.D.-19-22 Gauge 22.20mm O.D. to 20.10-20.80 mm I.D. |
CTP -875-19-22 | GCTP -875-19-22 | MCTP -875-19-22 | SCTP-1/2″-20 | BCTP-1/2″-20 |
| 1″ 0.D-16-18 Gauge 25.40mm O.D. to 22.00-22.90 mm I.D. |
CTP-1000-16-18 | GCTP-1000-16-18 | MCTP-1000-16-18 | SCTP-1/2″-20 | BCTP-1/2″-20 |
| 1″ O.D.19-22 Gauge 25.40 mm O.D. to 23.30-24.00 mm I.D. |
CTP-1 000-19-22 | GCTP-1 000-19-22 | MCTP- 1000-19-22 | SCTP- 1/2″-20 | BCTP-1/2″-20 |
| 1 1/8″ O.D.-16-18 Gauge 28.50mm O.D. to 25.20-26.00 mm I.D. |
CTP-1125-16-18 | GCTP-1125-16-18 | MCTP-1125-16-18 | SCTP-1/2″-20 | BCTP-1/2″-20 |
| 1 1/8″O.D. 19-22 Gauge 28.50mm O.D. to 26.40-27.10 mm I.D. |
CTP-1125-19-22 | GCTP-1125-19-22 | MCTP-1125-19-22 | SCTP-5/8″-18 | BCTP-5/8″-18 |
| 1 1/4″ O.D.-16-18 Gauge 31.75mm O.D. to 28.45-29.30 mm I.D. |
CTP-1250-16-18 | GCTP-1250-16-18 | MCTP-1250-16-18 | SCTP-5/8″-18 | BCTP-5/8″-18 |
| 1 1/4″ O.D-19-22 Gauge 31.75mm O.D. to 29.65-30.35 mm I.D. |
CTP-1250-19-22 | GCTP-1250-19-22 | MCTP-1250-19-22 | SCTP-518″-18 | BCTP-5/8″-18 |